العربية
Modern Concrete company has added to its products a new generation with modern technologies to obtain new patterns of tiling that give limitless options for floor finishing of all tile sizes. These products are characterized by the following characteristics
Our products are always conforming quality requirements according to international codes and Egyptian Code. Usually, the International codes adopted in our manufacturing and quality control of such products are as per the following:
Our company has a specialized laboratory for monitoring and examining all material on a daily basis to inspect any raw materials used in manufacturing process until the final products. They are inspecting: Analysis granular experience, Sandy equivalent, bulk density experiments, experiences pressure and absorption ...ect.
1. Cement content: Upper layer = (500 kg/m3) for all types & deferent strengths. 2. Water to cement ratio: (0.32 - 0.35). 3. Tolerances according to Egyptian standards and the European standards. 4. Thickness of upper layer (7) mm to 10 mm. 5. Strength = (350 to 700) kg/cm2 According to the strength required. 6. Absorption rate less than (5%) 7. Density ranging from (2200 to 2400) kg / m 3 8. Colors of the ratio (2% to 6%) of the type Pigment and major international companies.
The strength of the enormous pressure and continued strong vibration during production stage gives products a quality and high density. The curing process takes place in giant champers which thermally insulated and equipped with turbine fans to distribute the heat in all rooms equally, this curing process is very important for all products after the manufacturing stage, which is done Automatically and pre-programmed. All products are cured in main Champers, stored on suitable wooden pallets, then wrapped by Stretch nylon to save them from various weather factors. Our choice of raw materials (such as: dolomite materials and Siliceous natural and pure sand) in addition to the materials sieves, which sorts and refines materials to produce a high quality for our products. Also, the supervision of our team of engineers, qualified technicians and skilled workers makes us as pioneers in our field.